Texum | SWISS REINFORCEMENT COMPANY
Route des Daillettes 21, 1700 Fribourg | T + 41 26 422 24 31

 

Types of solicitations

Properties to master with care

 
enrobé bitumineux
 

Issues and consequences

Asphalt mixes are currently an essential component in the creation or rehabilitation of a road structure.

In a process of reinforcing road structures, the asphalt mixes used have an increasing hardness, making them more and more sensitive to cracking.

 

Several types of asphalt cracking are identified. For each of them, reinforcements or solutions may have to be prescribed.

The different cracking modes (type I, II or III) [Irwin 1957] are defined according to the movement of the crack lips.

 

Mode I: Pulling

From a given period of use, asphalt mixes tend to stiffen. This characteristic leads this material to become very sensitive to traction cracking, due to its deficiencies in elasticity initially ensured by the softness of the bituminous binder.

All three types of cracking (thermal, reflection and fatigue) will have a greater impact on a bituminous mix that is rigid (or initially rigid) over time.

     

    Mode II: Vertical shearing

    This second type of cracking is mainly encountered in structures made from existing concrete slabs, cleaned with an asphalt mix layer.

    It should be noted that this cracking mode is often combined with traction cracking (mode I).

     

    Mode III: Horizontal shearing

    This cracking process is still infrequent. However, it can occur and also has its own characteristics.

    In this case of application, often linked to internal stresses on the lower layers of the structure, the application of a reinforcing geogrid remains inefficient. Palliative solutions exist to limit the phenomenon while waiting for a more in-depth repair.

     

    TEXUM expertise

    To face these modes of rupture, different solutions are possible, thanks to geogrids of reinforcement or not.

    Mode I: Pulling

    Solution TEXGRID® GV 120
    Solution TEXGRID® CV 200

    Mode II: Vertical shear (combined with mode I)

    Solution TEXGRID® GV 120
    Solution TEXGRID® CV 200

    Mode III: Horizontal shearing

    • Bituminous mass caulking
     
     
     
    logoSwiss reinforcement company

    OFFICE@TEXUM.SWISS
    T : +41 26 422 24 31

    ROUTE DES DAILLETTES 21
    CH - 1700 FRIBOURG